Hi experts,

We are in the process of installing Oracle 12c software in order to perform an upgrade from 11.2.0.4 to 12.1.0.2 before upgrading our system from SAP NTW 7.4 to SAP NTW 7.5.

The installation process stops with the following error in the link binaries phase: Error invoking target 'rat_on part_on dm_on olap_on sdo_on rac_off dnfs_off' of makefile '/oracle/<SID>/12102/rdbms/lib/ins_rdbms´'.

In addition to the above described issue, while performing troubleshooting, the installation session was unexpectedly ended because to a power problem in our building. According to note 1915301, under common errors section, if the installation directory is no empty the software has to be uninstalled before re-run a new installation.

However the desinstall option fails: “ERROR: oracle/net/common/NetGetEnv.get(Ljava/lang/String;)”. No software is deleted from oracle home /oracle/<SID>/12102 and off course the re installation process failed with message “The selected Oracle Home contains directories or files”.

We’ve tried to desintall software following these three different approaches:

According to note 1915301: ./RUNINSTALLER –deinstall –home /oracle/<SID>/12102
According to note 1915314: ./runInstaller –deinstall –home /oracle/<SID>/12102
Also tried with the desintall utiliy outside the OUI: /oracle/<SID>/12102/desinstall/

Could you please help me in resuming the software installation? It is possible to simply remove current oracle home (/oracle/<SID>/12102) and reinstall software installation from scratch? I was considering rename current oracle home (/oracle/<SID>/12102 as (/oracle/<SID>/12102_BCKP), take a backup of the oraInventory and restart the software installation. Do you see any constraint in doing that?

Sorry for reporting two different incidents in the same discussion, but they are linked. I cannot move forward with troubleshooting of the first reported error without solving re installation problem.

• Current oracle release: 11.2.0.4
• OS Version: AIX 7100-03-04-1441
• Runinstaller version: 12.1.0.2.0 (059)
• Oracle Software Owner: ora<sid>

Please let us know if some extra data is required.

Thanks in advance

Hi,

When I compress one infocube its showing ora-14080 error.

Please help.

Current environment

SAP ERP 6.0 (ECC 6.0) / EHP: 4

ABAP Only.

Oracle: 11.2.0.2

Oracle instant client: 10.2.0.4 V5

SAP Kernel: 721 patch level 526

Type of upgrade: Out-of-place upgarde (Install binaries in new ORACLE_HOME), then upgrade using DBUA + SBP Patch, post-installation.

We have read through 1914631 - Central Technical Note for Oracle Database 12c Release 1 (12.1)

Questions:

Preparation work

1) Do we need to upgrade our oracle instant client at least to 11.2.0.4 latest version first?

2) Do we need to upgrade our SAP Kernel to version 7.22_EXT first ? Can it support non EXT?

What is the recommended kernel version we should go for?

3) For BR*Tools 7.40, we only apply after we upgrade the kernel to eg. 7.22_EXT?

4) Do we need to setup SSF first before the upgrade?

5) We don't use ACO feature in our current oracle, I guess we can skip (SAP note 2157904), right?

6) Do we need use create the new user oracle to perform the out-of-place upgrade or use <sid>adm?

What was understand 1915317 - Migrating Software Owner to 'oracle' the same source and target oracle must use the same software owner for upgrade. We want to reduce any downtime during day to day operation.

Thanks.

Dear Experts,

One of our client wants to setup Oracle DR for production system.

System Configuration :

ERP Release      :  EHP7 for SAP ERP 6.0

OS                         :  Windows Server 2012 std.

DATABASE          :  Oracle 11.2

Method                 :  Implementation of configuring log shipping using oracle database

RAM                      :  16 GB

we have decide will going to following method :

Install separate system and configure cron jobs for log shipping from Primary PRD to standby server and then apply it to database with cron jobs only.

Please suggest step by step process of above method.

If your answer is beneficial for me i will definitely give you points.

Thanks,

Rahul

Hi All,

According to sap note 1778431 - SAP Installations using Shared Oracle Homes we can make use of Oracle Shared Home.

However it talks about fresh installations of SAP.

Can I during the upgrade of 10.2 to 11.2 switch to use Oracle Shared Home?

What would I need to do to accomplish this?

I'm trying to kill 2 birds here so to make it easier when we upgrade to 12c and to make patching/maintenance easier plus regain some disk space as a result.

Thanks

Craig

Hi All,

I am doing patch upgrade from 11.2.0.3 to 11.2.0.4.
But the DBUA got stuck on 85% from last 1.30 hours. Also, DBUA is not generating log after 15% completion of upgrade.

Please suggest.

Regards,

Shyam

Hello,

I need to resize the redolog because I'm gettting the message Checkpoint not complete.

I've read this notes but I don´t know what is the best option or less "dangerous"

309526 - Enlarging redo log files

1259767 - Management of online redo log files using BRSPACE

With the brtools I dont know what I need to fill in on Redolog group number and Redolog member number.

D:\ORACLE\SID\ORIGLOGA\LOG_G11M1.DBF

C:\ORACLE\SID\MIRRLOGA\LOG_G11M2.DBF

D:\ORACLE\SID\ORIGLOGB\LOG_G12M1.DBF

C:\ORACLE\SID\MIRRLOGB\LOG_G12M2.DBF

D:\ORACLE\SID\ORIGLOGA\LOG_G13M1.DBF

C:\ORACLE\SID\MIRRLOGA\LOG_G13M2.DBF

D:\ORACLE\SID\ORIGLOGB\LOG_G14M1.DBF

C:\ORACLE\SID\MIRRLOGB\LOG_G14M2.DBF

Thanks

We are looking into an infrastructure refresh for one of our SAP customers. A number of options are under consideration, one of them being the use of Oracle Private Cloud Appliance for the database layer. So far there was just a brief meeting with Oracle hardware reps around this option and not all aspects could be covered in that short time frame. Unfortunately no one from the SAP area could be present in the meeting. One (important) element in the assessment is the integration of SAP LVM with the chosen solution – since we want to use the automation capabilities of LVM in the setup.  Can you provide information on the LVM integration for the infrastructure stack in this case : - database compute layer = Oracle PCA (Oracle VM + Oracle Linux + Oracle Enterprise) intention is to use Oracle RAC and DataGuard to secure scalability and uptime demands from the customer - database storage layer will be EMC (VMax3) with fiber-channel connection ; we want to use our existing Enterprise storage solution to use existing knowledge and support channels - as mentioned : SAP LVM will be used for automation of operations; We want to understand the capabilities and constraints (if any) of the considered hardware/software combination. I am aware that Oracle PCA can also be used to host the SAP application layer but that is not in scope at the moment.  Thanks in advance for any useful feedback, Frank

Hi Experts,

I tried to test Oracle database upgrade and I was stuck with one of the points – Migration Software Owner to ‘Oracle’.  I want to migrate user before Oracle upgrade, according to the note 1915317 one of the points is changing Ownership Oracle home via few scripts.

Scripts have been generated, but I’m not sure if correct options are selected:

If I want to change Ownership I must start the script - ./clone_assistnat.sh and generate scripts. All variable have been set, scripts have been generated with the following options:

• Action CONFIG not CLONE
• ORACLE_HOME - /oracle/SID/11204
• ORACLE_BASE - /orace/SID
• Do you want to change the software Owner for this oracle home ? – I selected yes (new owner – Oracle)

Source Oracle home       = not specified

Source Software Owner    = not specified:not specified

Target Oracle home       = /oracle/SID/11204

Target Software Owner    = orasid:dba

will be changed to         oracle:oinstall

Target Oracle home name  = ohn

Target Oracle base       = /oracle/SID

Target Oracle release    = 11.2

Target OSDBA group       = dba

Target OSOPER group      = oper

Copy command             = tar

Super user (root)        = root

Default oraInst.loc      = /etc/oraInst.loc

Inventory location       = not specified

MY VARIABLE FOR USER ora<sid>:

ORACLE_HOME - /oracle/SID/112_64

ORACLE_BASE - /oracle

ORACLE_SID - SID

1. What ORACLE_HOME should be set during the scripts generation ? - /oracle/SID/112_64 or /oracle/SID/11204 ?
2. ORACLE_BASE shoud be default /oracle/SID or as is defined in variable - /oracle
3. Shall I chose yes during the - Do you want to change the software Owner for this oracle home  and put new oracle owner and oracle group name ?

Thanks and Regards,

Tomasz

Hello Team

We are getting the below alert in SM21 and ST22 but we have enough space in PSAPSR3 TS (around 150GB).

I have added 1 new data file after that.

I am not able to understand this as we have enough space in TS

Could you please let us know how this error came and how to avoid this?

SM21

ST22

Regards

Sub

In order to decrease the number of archive logs and increase the size of it. I tried researching it and read the sdn and notes. Didn't find much information. Does Oracle allows to increase the archive log size or there are other things involved in it. Are there any good oss note about it. We get about 3000 oracle archive logs per week. Our goal is to reduce the archive logs (increase their sizes?). Is it possible if it is can please some one tell me the oss note or recommend me their analysis please

Hi All, In my landscape some systems has oracle RAC and some has Oracle as the database for SAP landscape. What is the major difference and or advantages of having and Oracle RAC..considering clustering feature is available with OS host level as well. Would also like to know who do I know from OS, DB as well as SAP level(using transaction DB02) to know whether DB is oracle or Oracle RAC. I checked blogs but no clear answers I found so far. Please help. Regards, Vicky

Dear All,

I am working on system refresh.  getting error during restore.

Unable to fix.  need suggestion and help to fix the same.

After executing command SQL > recover database using backup controfile until cancel;

I applied the logs. and it shows SQL > media recovery completed.

But, when I execute SQL > alter database open resetlogs;    I am getting below errors.

Need some help.

Regards

Ahmad.

Hi All,

We have recently upgraded our Netweaver 7.4 system to Oracle 12c version.

We are still using SAP classic approach for Oracle database user and softwares,datfiles are owned by orasid.

Since after the upgrade our RMAN backup reporting is not working, Our backup reporting tool use "oracle" OS user to connect to database and provide us backup status but since after the upgrade this user is facing issue while connecting to database.

This tool uses (sqlplus / ) command to connect to database  -

>sqlplus /

SQL*Plus: Release 12.1.0.2.0 Production on Thu Feb 25 11:12:05 2016

Copyright (c) 1982, 2014, Oracle.  All rights reserved.

ERROR:

ORA-01017: invalid username/password; logon denied

(sqlplus / as sysdba) is working with oracle user and it is able to connect but (sqlplus / ) is not working.

With sidadm and orasid, (sqlplus / ) is working.

We have OPS$ORACLE user also existing at database level and tried with setting SSFS environment variables with Oracle user but still same issue.

I know Oracle has introduced "oracle" OS user also with 12c for SAP installation, Not sure if somehow that concept is creating issue with our already existing oracle os user which we use only for RMAN backup reporting.

Please suggest what could be reason of this issue,

Regards,

Shivam

Dear Experts

I have entered new url in instance profile of webdispatcher and while starting the webdispatcher doesnot start, please find the dev_webdisp trace/log below

---------------------------------------------------

trc file: "dev_webdisp", trc level: 1, release: "742"

---------------------------------------------------

sysno      00

sid        WDP

systemid   562 (PC with Windows NT)

relno      7420

patchlevel 0

patchno    100

intno      20020600

make       multithreaded, Unicode, 64 bit, optimized

profile    C:\usr\sap\WDP\SYS\profile\WDP_W00_MAHSAPWDS

pid        3876

[Thr 4540] Thu Feb 25 16:50:53 2016

[Thr 4540] started security log to file ./dev_icm_sec

[Thr 4540] SAP Web Dispatcher running on: MAHSAPWDS

[Thr 4540] MtxInit: 30001 0 2

[Thr 4540] ***LOG IM1=> IcmInit, Startup (SAP Web Dispatcher&MAHSAPWDS&3876&) [icxxman.c    2046]

[Thr 4540] IcmInit: listening to admin port: 64998

[Thr 4540] *** ERROR => ShmDelete: Invalid shared memory Key=63. [shmnt.c      753]

[Thr 4540] *** ERROR => Shm[Thr 6400] CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Ext.

[Thr 6400] CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Ext.

[Thr 6400] IcrIAddSingleSystem: Added backend system: SID=ECP, MSHOST=eccprdci.mahyco.com, MSPORT=8100, SRCURL=/zhhdinout, SSL_ENCRYPT=0, SSL_IGNORE_HOST_MISMATCH=false

[Thr 6400] IcrCoreInitSessionTable: Session table initialized

[Thr 6952] Adding HttpAdminHandler: PREFIX=/sap/wdisp/admin,DOCROOT=C:\usr\sap\WDP\W00\data\icmandir,AUTHFILE=C:\usr\sap\WDP\SYS\global\security\data\icmauth.txt

[Thr 6952] HttpExtractArchive: files from archive C:\usr\sap\WDP\SYS\exe\nuc\NTAMD64/wdispadmin.SAR in directory C:/usr/sap/WDP/W00/data/icmandir are up to date

[Thr 6952] HttpISubHandlerAdd: Added handler HttpAdminHandler(0000000007F77E70), slot=0, flags=45061) for /sap/wdisp/admin, active: 1, table 0000000007F77A10

[Thr 6952] Adding HttpModHandler: PREFIX=/

[Thr 6952] CsiInit(): Initializing the Content Scan Interface

[Thr 6952]            PC with Windows NT (mt,unicode,SAP_CHAR/size_t/void* = 16/64/64)

[Thr 6952] CsiInit(): CSA_LIB = "C:\usr\sap\WDP\SYS\exe\nuc\NTAMD64\sapcsa.dll"

[Thr 6952] HttpISubHandlerAdd: Added handler HttpModHandler(0000000007F77F60), slot=1, flags=12293) for /, active: 1, table 0000000007F77A10

[Thr 6952] Adding HttpAuthHandler: PREFIX=/,FILTER=SAP

[Thr 6952] HttpISubHandlerAdd: Added handler HttpAuthHandler(0000000007E40E90), slot=2, flags=12293) for /, active: 1, table 0000000007F77A10

[Thr 6952] HttpISubHandlerAdd: Added handler HttpWebDispHandler(0000000007E44850), slot=3, flags=1060869) for /, active: 1, table 0000000007F77A10

[Thr 6952] WebSocketPlugInInit: WebSocket Plugin initialized

[Thr 6952] IcmAddHiddenService: Hidden service WEBSOCKETS started

[Thr 6952] =================================================

[Thr 6952] = SSL Initialization    platform tag=(ntamd64-msc16)

[Thr 6952] =   (742_REL,Mar 24 2015,mt,ascii-uc,SAP_UC/size_t/void* = 16/64/64)

[Thr 6952]   DIR_INSTANCE="C:\usr\sap\WDP\W00"

[Thr 6952]   DIR_LIBRARY="C:\usr\sap\WDP\SYS\exe\nuc\NTAMD64"

[Thr 6952]   ssl/ssl_lib="C:\usr\sap\WDP\W00\sec\nt-x86_64\sapcrypto.dll"

[Thr 6952]   profile param "ssl/ssl_lib" = "C:\usr\sap\WDP\W00\sec\nt-x86_64\sapcrypto.dll"

[Thr 6952]            resulting Filename = "C:\usr\sap\WDP\W00\sec\nt-x86_64\sapcrypto.dll"

[Thr 6952] =   found SAPCRYPTOLIB  5.5.5C pl39  (Apr 28 2015) MT,AESNI,NB

[Thr 6952] Thu Feb 25 16:50:54 2016

[Thr 6952] =   current UserID: MAHSAPWDS\SAPServiceWDP

[Thr 6952] =   found SECUDIR environment variable

[Thr 6952] =   using SECUDIR=C:\usr\sap\WDP\W00\sec\nt-x86_64

[Thr 6952]   ssl/server_pse="C:\usr\sap\WDP\W00\sec\nt-x86_64\SAPSSLS.pse"

[Thr 6952]   profile param "ssl/server_pse" = "C:\usr\sap\WDP\W00\sec\nt-x86_64\SAPSSLS.pse"

[Thr 6952]            resulting Filename = "C:\usr\sap\WDP\W00\sec\nt-x86_64\SAPSSLS.pse"

[Thr 6952]   ssl/ciphersuites="HIGH:MEDIUM:+e3DES:!aNULL"

[Thr 6952]   ssl/client_ciphersuites="HIGH:MEDIUM:+e3DES:!aNULL"

[Thr 6952] =  secussl_Create_SSL_CTX():  PSE "C:\usr\sap\WDP\W00\sec\SAPSSLC.pse" not found,

[Thr 6952] =      using PSE "C:\usr\sap\WDP\W00\sec\nt-x86_64\SAPSSLS.pse" as fallback

[Thr 6952] =  secussl_Create_SSL_CTX():  PSE "C:\usr\sap\WDP\W00\sec\SAPSSLA.pse" not found,

[Thr 6952] =      using PSE "C:\usr\sap\WDP\W00\sec\nt-x86_64\SAPSSLS.pse" as fallback

[Thr 6952] ******** Warning ********

[Thr 6952] *** No SSL-client PSE "SAPSSLC.pse" available

[Thr 6952] *** -- this might limit SSL-client side connectivity

[Thr 6952] ********

[Thr 6952] = Success -- SapCryptoLib SSL ready!

[Thr 6952] =================================================

[Thr 6952]

[Thr 6952] Started service PORT=8443,PROT=HTTPS,TIMEOUT=60,PROCTIMEOUT=60,VCLIENT=0

[Thr 6952] SSL settings: verify_client: 0, cache_size: -1, cache_lifetime: -1, credfile: SAPSSLS.pse, ciphers: default

[Thr 6952] IcmAddHiddenService: Hidden service WEBSOCKET started

[Thr 6952] Started service PORT=0,PROT=HTTP,TIMEOUT=60,PROCTIMEOUT=60

[Thr 6400] IcmCreateWorkerThreads: created worker thread 0

[Thr 6400] IcmCreateWorkerThreads: created worker thread 1

[Thr 6400] IcmCreateWorkerThreads: created worker thread 2

[Thr 6400] IcmCreateWorkerThreads: created worker thread 3

[Thr 6400] IcmCreateWorkerThreads: created worker thread 4

[Thr 6400] IcmCreateWorkerThreads: created worker thread 5

[Thr 6400] IcmCreateWorkerThreads: created worker thread 6

[Thr 6400] IcmCreateWorkerThreads: created worker thread 7

[Thr 6400] IcmCreateWorkerThreads: created worker thread 8

[Thr 6400] IcmCreateWorkerThreads: created worker thread 9

[Thr 6168] IcmWatchDogThread: watchdog started

[Thr 7016] Thu Feb 25 17:13:25 2016

[Thr 7016] IcrFindTargetSystem: No system found for url: /favicon.ico

[Thr 6316] Thu Feb 25 17:14:11 2016

[Thr 6316] IcrFindTargetSystem: No system found for url: /favicon.ico

[Thr 6236] Thu Feb 25 17:14:20 2016

[Thr 6236] IcrFindTargetSystem: No system found for url: /zhhddelv

[Thr 5180] Fri Feb 26 00:19:21 2016

[Thr 5180] *** WARNING => IcrTriggerLoadConfigAsync: config update for system ECP(0) is already running, skip process [icrxx.c      7929]

[Thr 7016] Fri Feb 26 00:19:29 2016

[Thr 7016] *** ERROR => ICR, system ECP: no access to URL '/sap/public/icf_info/icr_groups?version=2.1', http status 500 [icrxx.c      6622]

[Thr 7016] *** ERROR => please check activation of URL '/sap/public/icf_info/icr_groups?version=2.1' in ABAP backend ECP in transaction SICF (SAP note 552286)) [icrxx.c      6626]

[Thr 7016] *** WARNING => Failed to read group info for system ECP (ABAP,HTTP): Internal ICM error(-1) [icrxx.c      6782]

[Thr 5768] Fri Feb 26 00:19:46 2016

[Thr 5768] *** WARNING => IcrTriggerLoadConfigAsync: config update for system ECP(0) is already running, skip process [icrxx.c      7929]

[Thr 6236] Fri Feb 26 00:20:11 2016

[Thr 6236] *** WARNING => IcrTriggerLoadConfigAsync: config update for system ECP(0) is already running, skip process [icrxx.c      7929]

[Thr 1428] Fri Feb 26 00:20:36 2016

[Thr 1428] *** WARNING => IcrTriggerLoadConfigAsync: config update for system ECP(0) is already running, skip process [icrxx.c      7929]

[Thr 6664] Fri Feb 26 00:21:01 2016

[Thr 6664] *** WARNING => IcrTriggerLoadConfigAsync: config update for system ECP(0) is already running, skip process [icrxx.c      7929]

[Thr 5180] Fri Feb 26 00:21:26 2016

[Thr 5180] *** WARNING => IcrTriggerLoadConfigAsync: config update for system ECP(0) is already running, skip process [icrxx.c      7929]

[Thr 5768] Fri Feb 26 00:21:51 2016

[Thr 5768] *** WARNING => IcrTriggerLoadConfigAsync: config update for system ECP(0) is already running, skip process [icrxx.c      7929]

[Thr 6236] Fri Feb 26 00:22:16 2016

[Thr 6236] *** WARNING => IcrTriggerLoadConfigAsync: config update for system ECP(0) is already running, skip process [icrxx.c      7929]

[Thr 6136] Fri Feb 26 00:22:41 2016

[Thr 6136] *** WARNING => IcrTriggerLoadConfigAsync: config update for system ECP(0) is already running, skip process [icrxx.c      7929]

[Thr 6664] Fri Feb 26 00:23:06 2016

[Thr 6664] *** WARNING => IcrTriggerLoadConfigAsync: config update for system ECP(0) is already running, skip process [icrxx.c      7929]

[Thr 7016] Fri Feb 26 00:23:29 2016

[Thr 7016] *** WARNING => Failed to read URL prefix info for system ECP (ABAP,HTTP): Timeout occured(-5) [icrxx.c      6782]

[Thr 6748] Fri Feb 26 00:23:31 2016

[Thr 6748] *** WARNING => IcrTriggerLoadConfigAsync: config update for system ECP(0) is already running, skip process [icrxx.c      7929]

[Thr 6200] Fri Feb 26 00:23:56 2016

[Thr 6200] *** WARNING => IcrTriggerLoadConfigAsync: config update for system ECP(0) is already running, skip process [icrxx.c      7929]

[Thr 6316] Fri Feb 26 00:24:21 2016

[Thr 6316] *** WARNING => IcrTriggerLoadConfigAsync: config update for system ECP(0) is already running, skip process [icrxx.c      7929]

[Thr 1428] Fri Feb 26 00:24:46 2016

[Thr 1428] *** WARNING => IcrTriggerLoadConfigAsync: config update for system ECP(0) is already running, skip process [icrxx.c      7929]

[Thr 6664] Fri Feb 26 00:25:11 2016

[Thr 6664] *** WARNING => IcrTriggerLoadConfigAsync: config update for system ECP(0) is already running, skip process [icrxx.c      7929]

[Thr 6200] Fri Feb 26 00:26:01 2016

[Thr 6200] *** WARNING => IcrTriggerLoadConfigAsync: config update for system ECP(0) is already running, skip process [icrxx.c      7929]

[Thr 6316] Fri Feb 26 00:26:26 2016

[Thr 6316] *** WARNING => IcrTriggerLoadConfigAsync: config update for system ECP(0) is already running, skip process [icrxx.c      7929]

[Thr 1428] Fri Feb 26 00:26:51 2016

[Thr 1428] *** WARNING => IcrTriggerLoadConfigAsync: config update for system ECP(0) is already running, skip process [icrxx.c      7929]

[Thr 6664] Fri Feb 26 00:27:16 2016

[Thr 6664] *** WARNING => IcrTriggerLoadConfigAsync: config update for system ECP(0) is already running, skip process [icrxx.c      7929]

[Thr 6748] Fri Feb 26 00:27:41 2016

[Thr 6748] *** WARNING => IcrTriggerLoadConfigAsync: config update for system ECP(0) is already running, skip process [icrxx.c      7929]

[Thr 6200] Fri Feb 26 00:28:06 2016

[Thr 6200] *** WARNING => IcrTriggerLoadConfigAsync: config update for system ECP(0) is already running, skip process [icrxx.c      7929]

[Thr 5768] Fri Feb 26 00:28:31 2016

[Thr 5768] *** WARNING => IcrTriggerLoadConfigAsync: config update for system ECP(0) is already running, skip process [icrxx.c      7929]

[Thr 6236] Fri Feb 26 00:28:56 2016

[Thr 6236] *** WARNING => IcrTriggerLoadConfigAsync: config update for system ECP(0) is already running, skip process [icrxx.c      7929]

[Thr 6136] Fri Feb 26 00:29:21 2016

[Thr 6136] *** WARNING => IcrTriggerLoadConfigAsync: config update for system ECP(0) is already running, skip process [icrxx.c      7929]

[Thr 5180] Fri Feb 26 00:29:36 2016

[Thr 5180] *** WARNING => Failed to read group info for system ECP (ABAP,HTTP): Timeout occured(-5) [icrxx.c      6782]

[Thr 7016] Fri Feb 26 00:29:46 2016

[Thr 7016] *** WARNING => IcrTriggerLoadConfigAsync: config update for system ECP(0) is already running, skip process [icrxx.c      7929]

[Thr 6200] Fri Feb 26 00:30:11 2016

[Thr 6200] *** WARNING => IcrTriggerLoadConfigAsync: config update for system ECP(0) is already running, skip process [icrxx.c      7929]

[Thr 5768] Fri Feb 26 00:30:36 2016

[Thr 5768] *** WARNING => IcrTriggerLoadConfigAsync: config update for system ECP(0) is already running, skip process [icrxx.c      7929]

[Thr 6236] Fri Feb 26 00:31:01 2016

[Thr 6236] *** WARNING => IcrTriggerLoadConfigAsync: config update for system ECP(0) is already running, skip process [icrxx.c      7929]

[Thr 6136] Fri Feb 26 00:31:26 2016

[Thr 6136] *** WARNING => IcrTriggerLoadConfigAsync: config update for system ECP(0) is already running, skip process [icrxx.c      7929]

[Thr 7016] Fri Feb 26 00:31:51 2016

[Thr 7016] *** WARNING => IcrTriggerLoadConfigAsync: config update for system ECP(0) is already running, skip process [icrxx.c      7929]

[Thr 6200] Fri Feb 26 00:32:16 2016

[Thr 6200] *** WARNING => IcrTriggerLoadConfigAsync: config update for system ECP(0) is already running, skip process [icrxx.c      7929]

[Thr 6316] Fri Feb 26 00:32:41 2016

[Thr 6316] *** WARNING => IcrTriggerLoadConfigAsync: config update for system ECP(0) is already running, skip process [icrxx.c      7929]

[Thr 6236] Fri Feb 26 00:33:06 2016

[Thr 6236] *** WARNING => IcrTriggerLoadConfigAsync: config update for system ECP(0) is already running, skip process [icrxx.c      7929]

[Thr 1428] Fri Feb 26 00:33:31 2016

[Thr 1428] *** WARNING => IcrTriggerLoadConfigAsync: config update for system ECP(0) is already running, skip process [icrxx.c      7929]

[Thr 5180] Fri Feb 26 00:33:36 2016

[Thr 5180] *** WARNING => Failed to read URL prefix info for system ECP (ABAP,HTTP): Timeout occured(-5) [icrxx.c      6782]

[Thr 6664] Fri Feb 26 00:33:56 2016

[Thr 6664] *** WARNING => IcrTriggerLoadConfigAsync: config update for system ECP(0) is already running, skip process [icrxx.c      7929]

[Thr 6748] Fri Feb 26 00:34:21 2016

[Thr 6748] *** WARNING => IcrTriggerLoadConfigAsync: config update for system ECP(0) is already running, skip process [icrxx.c      7929]

[Thr 5768] Fri Feb 26 00:34:46 2016

[Thr 5768] *** WARNING => IcrTriggerLoadConfigAsync: config update for system ECP(0) is already running, skip process [icrxx.c      7929]

[Thr 6236] Fri Feb 26 00:35:11 2016

[Thr 6236] *** WARNING => IcrTriggerLoadConfigAsync: config update for system ECP(0) is already running, skip process [icrxx.c      7929]

[Thr 6664] Fri Feb 26 00:36:01 2016

[Thr 6664] *** WARNING => IcrTriggerLoadConfigAsync: config update for system ECP(0) is already running, skip process [icrxx.c      7929]

[Thr 6748] Fri Feb 26 00:36:26 2016

[Thr 6748] *** WARNING => IcrTriggerLoadConfigAsync: config update for system ECP(0) is already running, skip process [icrxx.c      7929]

[Thr 5768] Fri Feb 26 00:36:51 2016

[Thr 5768] *** WARNING => IcrTriggerLoadConfigAsync: config update for system ECP(0) is already running, skip process [icrxx.c      7929]

[Thr 6236] Fri Feb 26 00:37:16 2016

[Thr 6236] *** WARNING => IcrTriggerLoadConfigAsync: config update for system ECP(0) is already running, skip process [icrxx.c      7929]

[Thr 1428] Fri Feb 26 00:37:41 2016

[Thr 1428] *** WARNING => IcrTriggerLoadConfigAsync: config update for system ECP(0) is already running, skip process [icrxx.c      7929]

[Thr 6664] Fri Feb 26 00:38:06 2016

[Thr 6664] *** WARNING => IcrTriggerLoadConfigAsync: config update for system ECP(0) is already running, skip process [icrxx.c      7929]

[Thr 7016] Fri Feb 26 00:38:31 2016

[Thr 7016] *** WARNING => IcrTriggerLoadConfigAsync: config update for system ECP(0) is already running, skip process [icrxx.c      7929]

[Thr 6200] Fri Feb 26 00:38:56 2016

[Thr 6200] *** WARNING => IcrTriggerLoadConfigAsync: config update for system ECP(0) is already running, skip process [icrxx.c      7929]

[Thr 6316] Fri Feb 26 00:39:21 2016

[Thr 6316] *** WARNING => IcrTriggerLoadConfigAsync: config update for system ECP(0) is already running, skip process [icrxx.c      7929]

[Thr 6136] Fri Feb 26 00:39:36 2016

[Thr 6136] *** WARNING => Failed to read group info for system ECP (ABAP,HTTP): Timeout occured(-5) [icrxx.c      6782]

[Thr 5180] Fri Feb 26 00:39:46 2016

[Thr 5180] *** WARNING => IcrTriggerLoadConfigAsync: config update for system ECP(0) is already running, skip process [icrxx.c      7929]

[Thr 6664] Fri Feb 26 00:40:11 2016

[Thr 6664] *** WARNING => IcrTriggerLoadConfigAsync: config update for system ECP(0) is already running, skip process [icrxx.c      7929]

[Thr 7016] Fri Feb 26 00:40:36 2016

[Thr 7016] *** WARNING => IcrTriggerLoadConfigAsync: config update for system ECP(0) is already running, skip process [icrxx.c      7929]

[Thr 6200] Fri Feb 26 00:41:01 2016

[Thr 6200] *** WARNING => IcrTriggerLoadConfigAsync: config update for system ECP(0) is already running, skip process [icrxx.c      7929]

[Thr 6316] Fri Feb 26 00:41:26 2016

[Thr 6316] *** WARNING => IcrTriggerLoadConfigAsync: config update for system ECP(0) is already running, skip process [icrxx.c      7929]

i was trying to figureout and resolve the issue but unable to resolve, please help me resolve the issue.

Regards

Mohd Basis

Hello All,

We have a situation in our PI system where LUW is in transaction executing for long time.

Destination is ECC system. Here i can see that DIA process 85 is executing something for this LUW. But it takes a long time to complete.

Checked smqr resource allocation...its OK.

Checked smqs to see if ECC<SID>_<CLIENT> is registered. It is registered.

Checked sm21...nothing relevant in the logs.

What should be chcked now.

It took almost 4  hours to completed. Please help me how to troubleshoot this.

Br

Vishwanath B

Hey guys,

I've got a problem here. I hope, somebody can help me to find out what's wrong.

I have two oracle 12G databases on SLES 11. On both databases there are several (round about 30 on each DB) issues when brconnect validate structure is running.

That looks like this:

BR0280I BRCONNECT time stamp: 2016-02-29 11.29.25

BR0301E SQL error -1498 at location stats_tab_validate-2, SQL statement:

'ANALYZE TABLE "SAPSR3"."ATAB" VALIDATE STRUCTURE CASCADE ONLINE'

ORA-01498: block check failure - see trace file

BR0893E Validating structure failed for table/cluster SAPSR3.ATAB

I can't find any trace file in /oracle/<SID>/12102/rdbms/log. Is there any other location I can look into?

Also the alert-log is totally empty.

Can anyone give me a hint where I can find useful information about this issue?

Of course a solution would also be great

Thank you in advande for your comments.

I need to make a change to a report. Instead of a patient having only a diagnostic mammogram as an initial exam. I need to update this formula to  diagnostic mammogram or US Breast as initial. What are your thoughts? Do I need to insert an 'OR' operator in there somewhere?

Thanks

Matt

=If (Pos(Previous([Order Catalog Short Description]); "Diagnostic") <> 0 And Pos([Order Catalog Short Description]; "Diagnostic") = 0)

                  And (Previous([MRN- Organization]) = [MRN- Organization]) Then

   DaysBetween(Previous([Order Date & Time]);[Order Date & Time])

Else

   ""

Hi Experts,

While doing the export in source system (oracle12c+Linux) it's an SAP LT replication system development, i am getting the following error. Please help and suggest me how to proceed.

These are the following tables found error during the system copy.

In SAPAPPL0_1.log file found these two tables not there and no view found    /1BS/TEST_T_FK    /1LT/00000000240

In SAPAPPL1_1.log file found these two tables not there and no view found   /1BS/TEST_TABLE    /1CADMC/00000201

In SAPAPPL2_1.log file found these two tables not there and no view found    /1LT/00000000252

In SAPSSEXC_1.loh file found these two tables not there and no view found    /1CADMC/S0000236

SQL error 942

ORA-00942: table or view does not exist

error message returned by DbSl:

Without ORDER BY PRIMARY KEY the exported data may be unusable for some databases

ERROR: DbSlExeRead failed

Checked in SE14 for these  two tables and it's showing active but it's not there in the Database /1LT/00000000240  and /1CADMC/00000201 attached the screenshot for the same.

I thing these two are related to trigger based. Please check and help me to continue the export.

Thanks,

Narasimhan Krishna

HI Experts,

I heard that oracle 12c is come up with in-memory, rows & column maintains the specific tables. Can you tell me will this support fiori factsheet/Analytical applications.

Regards,

Govardhan.