Hi,

Beginner here.

I am executing tasks as part of the SAP system post-installation process for a single-stackJava AS. I need to update Oracle parameters based on a few SAP Notes ((1431798, 1171650, 1519872). When I open these notes there are many parameters and the list of set and "do not set!" is somewhat convoluted. I downloaded the note to my local drive by selecting "Download" but I don't see how I can use this file without reformatting the whole thing to proper SQL commands.

My question is: is there any easy, fast way of implementing these parameters versus... going to sqlplus, alter system etc. etc. ?

I have Oracle 11g, SAP version 7.4+

Thanks!

Hi All,

We are performing SAP JVM patch update in a clustered environment . We have 2 clustered DB nodes in oracle RAC clusterware and SCS instance is in the cluster. We are using SUM SP12 to update the JVM patch from4.1.0.37 to 57. We have reached downtime phase now and we need some clarifications and per-requisites that needs to be done for a cluster environment.Would like to know how to disable the autofailover of SCS instances in oracle RAC clusterware ??  how we can handle the maintenance mode in oracle RAC ?? is there are steps to disable auto failover and disable auto restart of SCS instance in other node ??

Kindly advise on this .

Thanks,

Utham

Hi Team,

Someone accidently triggered SAP connect job  in our quality environment. We have canceled job within 2 minutes. Now we are in process of finding the emails which got sent due to this job. When I goto SOST and serch sent transmission it is showing send date only which is the date when message was created.  and showing the exact date of transmission.

When I Double click on status it gives me transmission date and time. Is there any table from where I can find exact time when the mail got send from system.

Hi Experts,

We have Install SAP CRM for one of our client in MSCS cluster Environment , Production server is goes live ,But now we have faced one issue which is very critical ,

We are trying to schedule the backup using DB13 , Our DB is 11.2.0.4 with OFS 4.1 , But its getting cancelled , For resolving the above issue we followed SAP NOTE 1764650  and install Gateway ,

Now we are able to take Backup when Our DB and sap Role both is on Node1 ,

But we are not able to take backup if DB role or SAP role is on Node2 and vice versa also We are not able to take backup when SAP and DB role both on Node2

Please revert on how to resolve the issue.

Regards

Rableen

Our SAP ECC6 launched on 2013-07 and do data archive regularly.

However, the EKPO table size keeps rising all the time, current table size: 21.25GB, number of records: 20,101,749.

I found there are still plenty of history records, with the SQL statement :

SELECT COUNT(*) FROM SAPPRD.EKPO WHERE AEDAT BETWEEN '20160101' AND '20161231'

I found:

2015, no. of history reco: 9,722,328, 48.37% of the total no. of records.
2014, 4,486,634, 22.32% 2013-07 to 2013-12: 2,201,581, 10.95%
2013-01 to 2013-06: 1,403,960, 6.98%

I would like to know:

1. T-code OLME, 'Purchase order', 'Define Tolerance Limit for Archiving',

2. The Residence Time 1 of all the Purchase Doc Types are : 90.

3. The Residence Time 2 of all the Purchase Doc Types are : 30.
4. Why there are so many history records in EKPO even we do SAP data archive regularly?

Any ideal?

I am expecting your answers.

Thanks a lot.

Hello community,

i have question regarding SSFS with Oracle 12c on ExaData (distributed System).

I have installed ASCS and PAS on a standalone server and the Oracle database as a 3 node RAC on the ExaData.

R3trans -d is working from application- and database server witch <sid>adm user. No Problem:

4 ETW000 R3trans version 6.25 (release 742 - 01.02.16 - 13:15:00).

4 ETW000 unicode enabled version

4 ETW000 ===============================================

4 ETW000

4 ETW000 date&time   : 08.03.2016 - 10:41:31

4 ETW000 control file: <no ctrlfile>

4 ETW000 R3trans was called as follows: R3trans -d

4 ETW000  trace at level 1 opened for a given file pointer

4 ETW000  [     dev trc,00000]  Tue Mar  8 10:41:31 2016

4 ETW000  [     dev trc,00000]  Loading DB library '/usr/sap/<SID>/SYS/exe/run/dboraslib.so' ...

4 ETW000  [     dev trc,00000]  Library '/usr/sap/<SID>/SYS/exe/run/dboraslib.so' loaded

4 ETW000  [     dev trc,00000]  Version of '/usr/sap/<SID>/SYS/exe/run/dboraslib.so' is "742.06", patchlevel (0.324)

4 ETW000  [     dev trc,00000]  read_con_info_ssfs(): DBSL supports extended connect protocol

4 ETW000                         ==> connect info for default DB will be read from ssfs

4 ETW000  [     dev trc,00000]  Register application info.

4 ETW000  [     dev trc,00000]  Oracle client version: 12.1.0.2.0, V2, default build, (dbsl 742 160216, UNICODE[2])

4 ETW000  [     dev trc,00000]  Installed Oracle client patches:

4 ETW000  [     dev trc,00000]  # Patch  20988771     : Created on 10 May 2015, 05:21:28 hrs PST8PDT

4 ETW000  [     dev trc,00000]  # Patch  19594959     : Created on 29 Sep 2014, 03:47:01 hrs PST8PDT

4 ETW000  [     dev trc,00000]  # Patch  11799748     : Created on 29 Sep 2014, 12:28:11 hrs CEST

4 ETW000  [     dev trc,00000]  # Patch  11742262     : Created on 29 Sep 2014, 12:28:17 hrs CEST

4 ETW000  [     dev trc,00000]  Client NLS setting (by OCINlsGetInfo(con=0)): 'AMERICAN_AMERICA.UTF16'

4 ETW000  [     dev trc,00000]  Connecting as SAP<SID>/<pwd>@<SID> on connection 0 (nls 0) ... (dbsl 742 160216, UNICODE[2])

4 ETW000  [     dev trc,00000]  OCIHandleAlloc(con=0): Service svc=2064028 created, rc=0

4 ETW000  [     dev trc,00000]  OCIServerAttach(con=0, svc=2064028): New server hdl. srv=2066690 attached to '<SID>'

4 ETW000  [     dev trc,00000]  OCISessionBegin(con=0, svc=2064028, srv=2066690='<SID>'): start session usr=2097d50='SAP<SID>', rc=0

4 ETW000  [     dev trc,00000]  Now 'SAP<SID>/<pwd>@<SID>' is connected: con=0, nls=0, session=598, time='2016-03-08 10:41:31'

4 ETW000  [     dev trc,00000]  DB instance <SID>1 is running on dbserver with ORACLE version 12.1.0.2.0 since FEB 29, 2016, 09:08:08.

4 ETW000  [     dev trc,00000]  con=0, V$NLS_PARAMETERS: NLS_LANG=AMERICAN_AMERICA.UTF8, NLS_NCHAR=UTF8

4 ETW000  [     dev trc,00000]   # CharacterSet (DB)              NCharSet   svchp            srvhp            usrhp            nls TNS

4 ETW000  [     dev trc,00000]   0 UTF8                           UTF8       2064028          2066690          2097d50            0 <SID>                  

4 ETW000  [     dev trc,00000]   # CharacterSet (Env)             NCharSet   envhp            errhp            er2hp            bathp

4 ETW000  [     dev trc,00000]   0 UTF16                          AL16UTF16  203b200          2062010          2063090          2064110

4 ETW000  [     dev trc,00000]  Connection 0 opened (DBSL handle 0)

4 ETW000  [     dev trc,00000]     DbSlControl(DBSL_CMD_SAPRELEASE_SET,abap='740')

4 ETW000  [     dev trc,00000]  NTAB: Structure of NTAB on DB is VERS_B, unicodelg of executable is 2, unicodelg of SVERS in nametab is 2

4 ETW000 Connected to DBMS = ORACLE --- dbs_ora_tnsname = '<SID>' --- SYSTEM = '<SID>'.

4 ETW690 COMMIT "0" "0"

4 ETW000  trace to file pointer closed

4 ETW000  trace at level 1 opened for a given file pointer

4 ETW000

4 ETW000 ================== STEP 1 =====================

4 ETW000 date&time        : 08.03.2016 - 10:41:31

4 ETW000 function         : CONNECT

4 ETW000 buffersync       : YES

4 ETW000 clients          : default

4 ETW000 purgedocu        : YES

4 ETW000 commit           : 100000

4 ETW000 table cache      : dynamic

4 ETW000

4 ETW000  [     dev trc,00000]  Disconnecting from ALL connections:

4 ETW000  [     dev trc,00000]  Disconnecting con=0

4 ETW000  [     dev trc,00000]  OCISessionEnd(con=0, svc=2064028, srv=2066690='<SID>'): Close session usr=2097d50, rc=0

4 ETW000  [     dev trc,00000]  OCIServerDetach(stale1 con=0, svc=2064028, srv=2066690='<SID>') successfully detached

4 ETW000  [     dev trc,00000]  OCIHandleFree(con=0, svc=2064028): Server handle srv=2066690 freed

4 ETW000  [     dev trc,00000]  OCIHandleFree(con=0): Service hdl. svc=2064028 freed.

4 ETW000  [     dev trc,00000]  Disconnected from connection 0

4 ETW000  [     dev trc,00000]  statistics db_con_commit (com_total=1, com_tx=1)

4 ETW000  [     dev trc,00000]  statistics db_con_rollback (roll_total=0, roll_tx=0)

4 ETW000 Disconnected from database.

4 ETW000 End of Transport (0000).

4 ETW000 date&time: 08.03.2016 - 10:41:31

Right now i tried to run brconnect as <sid>adm on the databaseserver and i got the following error:

>>>>> brconnect -u // -c -f check

BR0801I BRCONNECT 7.40 (21)

BR1528E Calling a function of library rsec5lib failed at location BrSsBrUsrPwdGet-2, return code 1

BR1301E Error message from rsec5lib: SSFS-4187: Record with key "BR_TOOLS/DEFAULT_DB_USER" not found in secure storage <-- SSFS-4182: Data file "/oracle/<SID>/security/rsecssfs/data/SSFS_<SIS>.DAT" does not exist (this is not an error per se: a non-existing data file is a valid situation and treated equally as one without entries) <-- SSFS

BR1529E Getting BR*Tools user name/password from secure storage /oracle/<SID>/security/rsecssfs/data/SSFS_<SID>.DAT failed

BR0806I End of BRCONNECT processing: cesrhpzb.log 2016-03-08 10:44:47

BR0280I BRCONNECT time stamp: 2016-03-08 10:44:47

BR0804I BRCONNECT terminated with errors

And now my question.

I read about creating some directories in this post SSFS Implementation for Oracle Database

Create necessary directories

1. K sidadm

cd /usr/sap/SID/SYS/global

mkdir /usr/sap/SID/SYS/global/security

mkdir /usr/sap/SID/SYS/global/security/rsecssfs

mkdir /usr/sap/SID/SYS/global/security/rsecssfs/data

mkdir /usr/sap/SID/SYS/global/security/rsecssfs/key

But this is only on the application server i think. But what about the ExaData?

brconnect looked for the .DAT file in the following directory:

/oracle/<SID>/security/rsecssfs/data

And this is because $SAPDATA_HOME is set /oracle/<SID>

Is correct up to here?

So which user should create the following directories (oracle, <SID>adm or ora<SID>):

/oracle/<SID>/security

/oracle/<SID>/security/rsecssfs

/oracle/<SID>/security/rsecssfs/data

/oracle/<SID>/security/rsecssfs/key

And which permissions should they have?!

I also tried to copy the existing SSFS_<SID>.DAT from /usr/sap/SID/SYS/global/security/rsecssfs/data to /oracle/<SID>/security/rsecssfs/data with user oracle and also with <SID>adm. Then i go the following error message:

>>>>>>> brconnect -u // -c -f check

BR0801I BRCONNECT 7.40 (21)

BR1528E Calling a function of library rsec5lib failed at location BrSsBrUsrPwdGet-2, return code 1

BR1301E Error message from rsec5lib: SSFS-4218: Record with key "BR_TOOLS/DEFAULT_DB_USER" not found in secure storage <-- SSFS-4215: Data file "/oracle/<SID>/security/rsecssfs/data/SSFS_<SID>.DAT" exists, but does not contain the requested entry

BR1529E Getting BR*Tools user name/password from secure storage /oracle/<SID>/security/rsecssfs/data/SSFS_<SID>.DAT failed

BR0806I End of BRCONNECT processing: cesrhrmr.log 2016-03-08 11:01:57

BR0280I BRCONNECT time stamp: 2016-03-08 11:01:57

BR0804I BRCONNECT terminated with errors

Did someone had the same problem and what would be the solution for this?!

Regards,

Sascha

As I am trying to perform brbackup its displaying an error of sql error 1017 can any one suggest me how to rectify this, as i am giving me login credintials properly, but unable to execute the command & is there any link with TNP protocol as i am facing problem with that issue also, if so what are the steps to rectify them............?

We are trying to install SAP using SWPM on an existing Oracle database. We don't want SAP installer to create the database, but use an existing Oracle database instead. The custom parameters in the installer prompt for DBSID, but there is no way to input ORACLE_HOME. Our approach is to install oracle binaries as 'oracle' user on a separate ORACLE_HOME (for example /opt/oracle/product/db/12102) and then create a database and have SAP installer to point to that database to create tablespaces, schema etc., and then load the objects. It looks like SAP installer assumes that the ORACLE_HOME is /oracle/<SID>/121 and throws an error that it couldn't talk to the database.

Has anyone used this approach of installing SAP on an existing Oracle database? If so, are there any specific environment related parameters that need to be set to make this work?

Appreciate your help on this.

Dear Experts,

We have a oracle RAC ASM with two SAP db instance currently running. We are now planning to install another db instance on it. The database instance already exist are XX1, YY1 & we are planning to install ZZ1.

So my question is during ZZ1 installation what are the points I have to take notice so that it will not effect the others in the RAC. In sapinst in the below option which we have to select, whether i have to select MCOD or Install database (recreate if exist)

For Oracle_HOME for grid I have to share the same location of grid which I choose for other instances or something different

In the RAC parameters I gave the SID of the new system ZZ1

Kindly advise.

Regards,

Jituda

Hi All,

     Window Server 2012 R2 Std

     Oracle 12c

     SAP ECC 6.0

     We are planning to implement Oracle Rac in our existing SAP System.

     I have already searched for converting to oracle rac. I posted here I hope that I can get additional referrence from you experts.

Thanks,

Hello,

I want to perform a SAP system copy (homogeneous) with Oracle 11.2g in a Windows Server 2012. The source SAP system is running with Oracle 11.2g in a Windows Server 2003.

The problem... is when I try to execute the orabrcopy tool (in the source server) which is as you know, the tool that generate the control.sql file, it show me the following error:

I:\orabrcopy>"C:\j2sdkx64\bin\java.exe" -showversion -cp ".\.;.\orabrcopy.jar;E:\oracle\DEV\11204\jdbc\lib\ojdbc14.jar" com.sap.inst.lib.app.SecureStartup "" com.sap.inst.orabrcopy.OraBRCopy -oracleHome "E:\oracle\DEV\11204" -sourceSid "DEV" -generateFiles -forceLogSwitches -targetSid DEV -password #devsystem -listenerPort 1527

java version "1.4.2_42" Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_42-b03)

Java HotSpot(TM) 64-Bit Server VM (build 1.4.2_42-b03, mixed mode)

 

Required system resources are missing or not available:

  Error loading Oracle JDBC driver.

In the orabrcopy guide, I read the following prerequisites:

- I have installed in the server the JRE version 1.4.2 as you can see in the following information:

I:\orabrcopy>java -fullversion

java full version "1.4.2_42-b03"

- The JAVA_HOME environment variable is set with the correct path: C:\j2sdkx64

- I´m running this with <sapsid>adm user (which belongs to the Oracle DBA group)

- In the <ORACLE_HOME>/jdbc/lib I have the file classes12.jar as you can see in the following image:

- Both services... oracle database and listener are started.

So... I can´t understand what is wrong with this!! Why it show me the error:

Required system resources are missing or not available:

  Error loading Oracle JDBC driver.

Can you help me please? (This is urgent)

Best regards,

João Dimas

Hi Experts

We are running on an Oracle DB witgh Oracle DB Optimizer - but my issue is that the optimizer dont alway pick the most effective index and we need to use the HINT. Is it possible to switch of the indexing functionality on the optimizer.

Thanks

Hi Gurus,

Im using ERP ECC 6.06 with SAP_BASIS 731 SP5, SAP_APPL 606 SP5,

and planning to upgrade component C-CEE 110_604 support package from 21 to 28.

can we directly using SPAM ? any per-requisite that need to take concern

please advise.

Thanks

Regards

Lowis

Hello,

I´m performing a SAP homogeneous system copy using the software provisioning manager (70SWPM version) with a Oracle DB 11.2 (11.2.0.4) in Windows Server 2012 (R2).

Now I´m facing an error during the installation/system copy in the target server in the phase "Oracle Backup/Restore database - control.sql".

In the log files I see the following error:

An error occurred while processing option SAP Business Suite 2005 > SAP ERP 6.0 Support Release 3 > Software Life-Cycle Options > System Copy > Oracle > Target System Installation > Central System > Based on AS ABAP > Central System( Last error reported by the step: System call failed. Error 3 (The system cannot find the path specified. ) in execution of system call 'CreateDirectory' with parameter (I:\, NULL), line (821) in file (d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\syslib\synxcpath.cpp), stack trace: d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\ejs\ejscontroller.cpp: 181: EJSControllerImpl::executeScript() d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\ejs\jsextension.hpp: 1136: CallFunctionBase::call() d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\osmod\iaxxcfile.cpp: 183: iastring CIaOsFileConnect::callMemberFunction(iastring const& name, args_t const& args) d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\osmod\iaxxcfile.cpp: 1671: iastring CIaOsFileConnect::createDirectoryFromPath(args_t const& _args) d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\osmod\iaxxbfile.cpp: 674: CIaOsFile::createDirectoryFromPath_impl() d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\syslib\syxxcfsmgt.cpp: 476: CSyFileSystemMgtImpl::createDirectory(I:/oracle/DEV) d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\syslib\syxxcpath.cpp: 1367: createMissingParentDirectories(I:/oracle/DEV) d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\syslib\synxcpath.cpp: 808: CSyPath::createDirectory() .). You can now:

Choose Retry to repeat the current step.

Choose Log Files to get more information about the error.

Stop the option and continue later.

Log files are written to C:\Program Files/sapinst_instdir/BS2005/ERP60SR3/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/.

There is something strange in this log file, as you see it mention some lines with the statement "... (I:/oracle/DEV)..." and I can´t understand why it´s using this path because in the target server I don´t have that disk (I:) in my filesystem, I only see that in source server. I already checked the control.sql and init<SID>.ora files and I don´t see any reference to I: disk or paths, therefore I don´t get it!

I can´t understand what is wrong here... can you help me please?

Best regards,

João Dimas

Hi Team,

Someone accidently triggered SAP connect job  in our quality environment. We have canceled job within 2 minutes. Now we are in process of finding the emails which got sent due to this job. When I goto SOST and serch sent transmission it is showing send date only which is the date when message was created.  and showing the exact date of transmission.

When I Double click on status it gives me transmission date and time. Is there any table from where I can find exact time when the mail got send from system.

(i couldn't get my screenshots to show up - so see attached file for those)

==

Hi Folks –

I have a technical question regarding Oracle TNS config for an SAP system.  From time to time I see this problem and want to get a deeper understanding of how it works.

So for example below we had an NW70 system running on 11204 Oracle (same question here applies to any SAP on oracle).  We also had a HA cluster on unix involved – so 2 unix cluster node servers (g1u3055c/g2u2187c) and some remote sap application servers as well.

The DB was up/running on the g2u2187c node shown below.  Obviously in order for SAP to be able to start it has to connect properly to the DB level – and this is where the oracle TNS config comes into play.  So we check this w/ “R3trans –d” as <sid>adm user on the unix server where the DB was running.  In this case that was failing w/ an ora-12514 type of TNS error.

Next on the DB server (g2u2187c) I tried to see whether the listener was up/running by checking for an o/s level PID and found this

So next as ora<sid>user on same server I wanted to see the output of “lsnrctl status <listener name>” (here listener name was what I saw running at the o/s level – e.g. LISTENER_PRX) – and below is what that showed – NOTE that the msg “The listener supports no services” is shown!

>> to add – as <sid>adm here – I had checked its environmental variables to see whether TNS_ADMIN was set – and it was NOT – so in this case the SAP user <sid>adm was simply taking the TNS oracle config info from the oracle default location ($ORACLE_HOME/network/admin)

I know that “R3trans –d” for sidadm will never work unless the aforementioned “lsnrctl status….” command output shows a service for that SID.  So fixing that in these cases is clearly the next step.  And I am aware that the fix is some combination of checking the listener.ora, tnsnames.ora config and possibly restarting the oracle listener.

My question:  can anyone provide concrete steps technically that lead to the “listener supports no services” output shown above and how to fix? (like when this command is run, what is it doing behind the scenes exactly…….by knowing that, I’d know better what exactly to check/change in those TNS files)

Thanks

Hello,

DB: Oracle 11.2g (11.2.0.4)

OS: Windows Server 2012 (R2)

I´m doing a homogeneous system copy and during the target server installation/copy, the software provisioning manager stopped with an error during the phase "Start Instance":

I checked the SAPMMC console and in fact the disp+work.EXE is stopped (with grey color).

I checked the log file dev_disp and I see the following error:

...

Mon Mar 14 16:27:59 2016

*** ERROR => DpHdlDeadWp: W9 (pid 3912) died (severity=0, status=0) [dpxxwp.c     1746]

...

Then I checked the dev_w9 log file and I see the following errors:

...

C 

C Mon Mar 14 16:26:47 2016

C     OCISessionBegin(OCI_DEFAULT) failed with SQL error 1017:

C     ORA-01017: invalid username/password; logon denied                                                                           

C  OCISessionBegin(con=0, svc=035BEA60, srv=035C2120='DEV'): start session usr=035D1260='SAPSR3', rc=1017

C  OCIHandleFree(con=0, svc=035BEA60): Free session hdl usr=035D1260

C  OCIServerDetach(stale2 con=0, svc=035BEA60, srv=035C2120='DEV') successfully detached

C  OCIHandleFree(con=0, svc=035BEA60): Server handle srv=035C2120 freed

C  OCIHandleFree(con=0): Service svc=035BEA60 freed (i=0).

C  rc=1017 -> Trying to reattach to server 'DEV'

C  OCIHandleAlloc(con=0): Service svc=035BEA60 created, rc=0

C  OCIServerAttach(con=0, svc=035BEA60): New server hdl. srv=035C2120 attached to 'DEV'

C 

C Mon Mar 14 16:27:49 2016

C     OCISessionBegin(OCI_DEFAULT) failed with SQL error 3113:

C     ORA-03113: end-of-file on communication channel                                                                              

C  OCISessionBegin(con=0, svc=035BEA60, srv=035C2120='DEV'): start session usr=035D1260='SAPSR3', rc=3113

C  OCIHandleFree(con=0, svc=035BEA60): Free session hdl usr=035D1260

C  OCIServerDetach(stale2 con=0, svc=035BEA60, srv=035C2120='DEV') successfully detached

C  OCIHandleFree(con=0, svc=035BEA60): Server handle srv=035C2120 freed

C  OCIHandleFree(con=0): Service svc=035BEA60 freed (i=1).

C  *** ERROR => CONNECT failed with SQL error '3113'

[dbsloci.c    16104]

B  ***LOG BV3=> severe db error 3113; work process is stopped [dbsh         1241]

B  ***LOG BY2=> sql error 3113   performing CON [dblink       544]

B  ***LOG BY0=> ORA-03113: end-of-file on communication channel [dblink       544]

M  ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1538]

M  in_ThErrHandle: 1

M  *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   11614]

M 

M  Info for wp 9

...

I also ran the R3trans -d with <sid>adm operation system user and I also see the same errors:

4 ETW000 r3trans version 6.24 (release 721 - 31.07.15 - 14:39:42).

4 ETW000 ===============================================

4 ETW000

4 ETW000 date&time   : 14.03.2016 - 16:24:18

4 ETW000 control file: <no ctrlfile>

4 ETW000 R3trans was called as follows: r3trans -d

4 ETW000  trace at level 1 opened for a given file pointer

4 ETW000  [     dev trc,00000]  Mon Mar 14 16:24:18 2016

4 ETW000  [     dev trc,00000]  Loading DB library 'dboraslib.dll' ...

4 ETW000  [     dev trc,00000]  Mon Mar 14 16:24:19 2016

4 ETW000  [     dev trc,00000]  Library 'dboraslib.dll' loaded

4 ETW000  [     dev trc,00000]  Version of 'dboraslib.dll' is "721.02", patchlevel (0.600)

4 ETW000  [     dev trc,00000]  con_info_ext_support(): DBSL supports extended connect protocol

4 ETW000                          ==> connect info for default DB will be read from ssfs

4 ETW000  [     dev trc,00000]  dbs/ora/stmt_cache_size = 250

4 ETW000  [     dev trc,00000]  Register application info.

4 ETW000  [     dev trc,00000]  Mon Mar 14 16:24:20 2016

4 ETW000  [     dev trc,00000]  Oracle client version: 11.2.0.4.0, (dbsl 721 180915, non-unicode)

4 ETW000  [     dev trc,00000]  Detailed Oracle client (patch) info not available.

4 ETW000  [     dev trc,00000]  Mon Mar 14 16:24:22 2016

4 ETW000  [     dev trc,00000]  Client NLS setting (by OCINlsGetInfo(con=0)): 'AMERICAN_AMERICA.WE8DEC'

4 ETW000  [     dev trc,00000]  Connecting as SAPSR3/<pwd>@DEV on connection 0 (nls 0) ... (dbsl 721 180915, non-unicode)

4 ETW000  [     dev trc,00000]  OCIHandleAlloc(con=0): Service svc=04132B40 created, rc=0

4 ETW000  [     dev trc,00000]  Mon Mar 14 16:24:25 2016

4 ETW000  [     dev trc,00000]  OCIServerAttach(con=0, svc=04132B40): New server hdl. srv=04136190 attached to 'DEV'

4 ETW000  [     dev trc,00000]  Mon Mar 14 16:24:36 2016

4 ETW000  [     dev trc,00000]     OCISessionBegin(OCI_DEFAULT) failed with SQL error 1017:

4 ETW000  [     dev trc,00000]     ORA-01017: invalid username/password; logon denied                                                                           

4 ETW000  [     dev trc,00000]  OCISessionBegin(con=0, svc=04132B40, srv=04136190='DEV'): start session usr=041451D0='SAPSR3', rc=1017

4 ETW000  [     dev trc,00000]  OCIHandleFree(con=0, svc=04132B40): Free session hdl usr=041451D0

4 ETW000  [     dev trc,00000]  OCIServerDetach(stale2 con=0, svc=04132B40, srv=04136190='DEV') successfully detached

4 ETW000  [     dev trc,00000]  OCIHandleFree(con=0, svc=04132B40): Server handle srv=04136190 freed

4 ETW000  [     dev trc,00000]  OCIHandleFree(con=0): Service svc=04132B40 freed (i=0).

4 ETW000  [     dev trc,00000]  rc=1017 -> Trying to reattach to server 'DEV'

4 ETW000  [     dev trc,00000]  OCIHandleAlloc(con=0): Service svc=04132B40 created, rc=0

4 ETW000  [     dev trc,00000]  OCIServerAttach(con=0, svc=04132B40): New server hdl. srv=04136190 attached to 'DEV'

4 ETW000  [     dev trc,00000]  Mon Mar 14 16:24:46 2016

4 ETW000  [     dev trc,00000]     OCISessionBegin(OCI_DEFAULT) failed with SQL error 1017:

4 ETW000  [     dev trc,00000]     ORA-01017: invalid username/password; logon denied                                                                           

4 ETW000  [     dev trc,00000]  OCISessionBegin(con=0, svc=04132B40, srv=04136190='DEV'): start session usr=041451D0='SAPSR3', rc=1017

4 ETW000  [     dev trc,00000]  OCIHandleFree(con=0, svc=04132B40): Free session hdl usr=041451D0

4 ETW000  [     dev trc,00000]  OCIServerDetach(stale2 con=0, svc=04132B40, srv=04136190='DEV') successfully detached

4 ETW000  [     dev trc,00000]  OCIHandleFree(con=0, svc=04132B40): Server handle srv=04136190 freed

4 ETW000  [     dev trc,00000]  OCIHandleFree(con=0): Service svc=04132B40 freed (i=1).

4 ETW000  [dbsloci.c   ,00000]  *** ERROR => CONNECT failed with SQL error '1017'

4 ETW000  [     dev trc,00000]  Mon Mar 14 16:24:47 2016

4 ETW000  [    dblink  ,00000]  ***LOG BY2=>sql error 1017   performing CON

4 ETW000  [    dblink  ,00000]  ***LOG BY0=>ORA-01017: invalid username/password; logon denied

2EETW169 no connect possible: "DBMS = ORACLE                           --- dbs_ora_tnsname = 'DEV'"

I already faced this ORA error in other situations but know I can´t understand what is wrong and how to correct it!

I read the sap note 1576837 - ORA-01017: invalid username/password; but I can´t understand which scenario applies to my specific case!

I checked the database users (select username, account_status from dba_users;) and I don´t see anything wrong :

Any tips? Can you help me please to understand what is wrong here and how to correct this error?

Kind regards,

Thank you,

João Dimas

HI Folks,

Could anyone please suggest  how to proceed  further if the full stats command brconnect -c -u / -f stats -t all –f collect -p 4 has not updated the tables in ECC system.

Regards,

Sharma TVK

Hello,

I want to perform a SAP system copy (homogeneous) with Oracle 11.2g in a Windows Server 2012. The source SAP system is running with Oracle 11.2g in a Windows Server 2003.

The problem... is when I try to execute the orabrcopy tool (in the source server) which is as you know, the tool that generate the control.sql file, it show me the following error:

I:\orabrcopy>"C:\j2sdkx64\bin\java.exe" -showversion -cp ".\.;.\orabrcopy.jar;E:\oracle\DEV\11204\jdbc\lib\ojdbc14.jar" com.sap.inst.lib.app.SecureStartup "" com.sap.inst.orabrcopy.OraBRCopy -oracleHome "E:\oracle\DEV\11204" -sourceSid "DEV" -generateFiles -forceLogSwitches -targetSid DEV -password #devsystem -listenerPort 1527

java version "1.4.2_42" Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_42-b03)

Java HotSpot(TM) 64-Bit Server VM (build 1.4.2_42-b03, mixed mode)

 

Required system resources are missing or not available:

  Error loading Oracle JDBC driver.

In the orabrcopy guide, I read the following prerequisites:

- I have installed in the server the JRE version 1.4.2 as you can see in the following information:

I:\orabrcopy>java -fullversion

java full version "1.4.2_42-b03"

- The JAVA_HOME environment variable is set with the correct path: C:\j2sdkx64

- I´m running this with <sapsid>adm user (which belongs to the Oracle DBA group)

- In the <ORACLE_HOME>/jdbc/lib I have the file classes12.jar as you can see in the following image:

- Both services... oracle database and listener are started.

So... I can´t understand what is wrong with this!! Why it show me the error:

Required system resources are missing or not available:

  Error loading Oracle JDBC driver.

Can you help me please? (This is urgent)

Best regards,

João Dimas

Dear All,

I 'm getting above error in dew_v0.

---------------------------------------------------

trc file: "dev_w0", trc level: 1, release: "46D"

---------------------------------------------------

*

*  ACTIVE TRACE LEVEL           1

*  ACTIVE TRACE COMPONENTS      all, M

*

B 

B Fri Mar 18 00:41:44 2016

B  create_con (con_name=R/3)

B  Loading DB library 'E:\usr\sap\PRD\SYS\exe\run\dboraslib.dll' ...

B  Library 'E:\usr\sap\PRD\SYS\exe\run\dboraslib.dll' loaded

B  Version of library 'E:\usr\sap\PRD\SYS\exe\run\dboraslib.dll' is "46D.00", patchlevel (0.2099)

B  New connection 0 created

M  relno      4640

M  patchlevel 0

M  patchno    1674

M  intno      0

M  pid        2596

M 

M  ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2596) [dpxxdisp.c   958]

I  MtxInit: -2 0 0

X 

X Fri Mar 18 00:41:45 2016

X  EmInit: MmSetImplementation( 2 ).

X  <ES> client 0 initializing ....

X  Using implementation std

M  <ES> Memory Reset enabled

X  ES initialized.

M 

M Fri Mar 18 00:41:46 2016

M  ThSysUsrCheck: clear T0

M  calling db_connect ...

C  Got ORACLE_HOME=E:\oracle\ora920 from environment

C 

C Fri Mar 18 00:41:47 2016

C  Got NLS_LANG=AMERICAN_AMERICA.WE8DEC from environment

C  Logon as OPS$-user to get SAPR3's password

C  Connecting as /@PRD on connection 0 ...

C 

C Fri Mar 18 00:41:55 2016

C  Now I'm connected to ORACLE using OCI_7 API

C  Got SAPR3's password from table SAPUSER

C  Disconnecting from connection 0 ...

C 

C Fri Mar 18 00:41:57 2016

C  Now I'm disconnected from ORACLE

C  Try to connect with the password I got from OPS$-user

C  Connecting as SAPR3/<pwd>@PRD on connection 0 ...

C 

C Fri Mar 18 00:41:58 2016

C  Now I'm connected to ORACLE using OCI_7 API

C 

C Fri Mar 18 00:41:59 2016

C  Database instance prd is running on SAPPROD with ORACLE version 9.2.0.8.0 since 20160318

B  Connection 0 opened

B  Wp  Hdl ConName              ConCnt ConState     TX  PRM RCT Date     Time

B  000 000 R/3                  000000 ACTIVE       NO  YES NO  20160318 004146

M  db_connect o.k.

I 

I Fri Mar 18 00:42:11 2016

I  MtxInit: 0 0 0

X  EmInit: MmSetImplementation( 2 ).

X  <ES> client 0 initializing ....

X  Using implementation std

X  ES initialized.

B  db_con_shm_ini:  WP_ID = 0, WP_CNT = 23

M  rdisp/reinitialize_code_page -> 0

M  PfReadDBVersion: use compatibility mode for stat-files

S  *** init spool environment

S  initialize debug system

T  Stack direction is downwards.

T  debug control: prepare exclude for printer trace

T  new memory block 0637B020

S 

S Fri Mar 18 00:42:12 2016

S  spool kernel/ddic check: Ok

S  using table TSP02FX for frontend printing

S  1 spool work process(es) found

S  frontend print via spool service enabled

S 

S Fri Mar 18 00:42:15 2016

S  printer list size is 150

S  printer type list size is 50

S  queue size (profile)   = 300

S  hostspool list size = 3000

S  option list size is 30

S      found processing queue enabled

S  found spool memory service RSPO-RCLOCKS at 241A0098

S  doing lock recovery

S  setting server cache root

S 

S Fri Mar 18 00:42:16 2016

S  found spool memory service RSPO-SERVERCACHE at 241A05D8

S    using messages for server info

S  immediate print option for implicitely closed spool requests is disabled

A 

A  ---PXA-------------------------------------------

A  PXA INITIALIZATION

A  Attached to PXA (address 24260040, size 154298K)

A  abap/pxa = shared

A  PXA INITIALIZATION FINISHED

A  ---PXA-------------------------------------------

A 

A  RFC Destination> destination SAPPROD_PRD_00 host SAPPROD system PRD systnr 0 (SAPPROD_PRD_00)

A  RFC Options> H=SAPPROD,S=00

A 

A Fri Mar 18 00:42:18 2016

A  RFC rfc/dump_client_info not set, use default -1

A  RFC Method> initialize RemObjDriver for ABAP Objects

M  SsfSapSecin: putenv(SECUDIR=E:\usr\sap\PRD\DVEBMGS00\sec): ok

M 

M  =================================================

M  === SSF INITIALIZATION:

M  ===...SSF Security Toolkit name SAPSECULIB .

M  ===...SSF trace level is 0 .

M  ===...SSF library is E:\usr\sap\PRD\SYS\exe\run\sapsecu.dll .

M  ===...SSF hash algorithm is SHA1 .

M  ===...SSF symmetric encryption algorithm is DES-CBC .

M 

M Fri Mar 18 00:42:21 2016

M  ===...sucessfully completed.

M  =================================================

C 

C Fri Mar 18 00:42:33 2016

C  *** ERROR => ORA-8103 occurred; SQL statement is ==>

[dbsloci.c    8749]

C  SELECT "FUNCNAME" , "PNAME" , "INCLUDE" , "FREEDATE" , "APPL" , "MAND" , "FMODE" , "HOST" , "UTASK" \

C  FROM "TFDIR" WHERE "FUNCNAME" = :A0;

B  ***LOG BY4=> sql error 8103   performing SEL on table TFDIR      [dbtrtab 6295 ]

B  ***LOG BY0=> ORA-08103: object no longer exists

[dbtrtab 6295 ]

M  ***LOG R68=> ThIRollBack, roll back () [thxxhead.c   10619]

A 

A Fri Mar 18 00:42:50 2016

A 

A  ** RABAX:  level LEV_SN_C_STACK failed.

A  Fri Mar 18 00:42:50 2016

A  ABAP/4 Program SAPMSSYD                                .

A  Source SAPMSSYD                                 Line 98.

A  Error Code DBIF_RTAB_SQL_ERROR.

A  Module  $Id: //bas/46D/src/krn/runt/ablink.c#3 $ SAP.

A  Function ab_tfdir Line 139.

A  &INCLUDE DBIF_RSQL_SQL_ERROR.

A 

M 

M Fri Mar 18 00:42:51 2016

M  ***LOG R68=> ThIRollBack, roll back () [thxxhead.c   10619]

B 

B Fri Mar 18 00:42:59 2016

B  dbtran INFO (init_connection '<DEFAULT>' [ORACLE:46D.00]):

B   max_blocking_factor =   5,  max_in_blocking_factor      =1000,

B   min_blocking_factor =   5,  min_in_blocking_factor      =  10,

B   prefer_union_all    =   0,  prefer_union_for_select_all =   0,

B   prefer_fix_blocking =   0,  prefer_in_itab_opt          =   0,

B   convert AVG         =   0,  alias table FUPD            =   0,

B   escape_as_literal   =   0,  opt GE LE to BETWEEN        =   0,

B   select *            = 0x3,

B   use_hints           = abap->1, dbif->1, upto->4294967295, rule_in->0,

B                         rule_fae->0, concat_fae->0, concat_fae_or->0

C 

Regards

Vasek