Getting the error message "SAP system message No connect to database, session terminated" when connected from GUI.

This second time in last one week.

DB - Oracle 10

OS - Windows 2008 R2

Oracle and SAP are on the same server and in running state. Oracle listener is running and r3trans gave return code 0000, still none of us are able to connect to server. No network issue and None of the LUNS are SAN disks are altered from storage.

Dev_w0.txt, alert_chq.txt and DB status.JPG are attached for your reference.

Quick help is much appreciated.

Hi All,

Hyperion integration with BOBJ 4.1 Support Pack 4 Patch 7.

Please explain about the process like which Hyperion client and server need install,setup env variables and JAR files.

Advance thanks

Regards,

Sreekantha.

Hello,

I´m adjusting some oracle parameters but now I´m with some doubts regarding the log_buffer size value!

This is a production SAP system running on Oracle DB 11.2g (11.2.0.4) in a Windows Server 2012 (R2).

Some questions/doubts:

1. Which unit the log_buffer has? Bytes? (The default value in my database is 14254080).

2. I read the sap note 1431798 (Oracle 11.2.0: Database Parameter Settings) and then the sap note 1627481 (Preemptive redolog switches in Oracle 11.2 and higher) and in this last one I read some requirements (my server has 8 cores):

For systems with <= 16 cores set the logbuffer to 4MB or don't set it at all.

So... I changed the value (consider that parameter is in bytes unit) to 4194304 bytes (4 megabytes)

This is a good decision or not? Tell me your opinion please.

3. In the same sap note 1627481 I see the following statement:

If you have set the logbuffer to 4MB, then create redo logfiles of at least 200MB.This minimum configuration should only be used for DEV, Test or QA systems but not for production systems.

But I don´t understand... as I said before I set the log_buffer to 4MB but now I want to know which value I must set to the redo logfiles (origlogs and mirrlogs) in a production system. As you see the sap note only described the value for DEV, Test or QA systems, not for the production systems.

Which value is recommended for redolog files?

Can you answer to these three questions?

Any other recommendations?

Thank you,

Best regards,

João Dimas

Hello,

We are changing SAP System SID and Database SID using SWPM.

TS1 is our new SAP and DB SID

In Rename/Config database step, we are getting below error.

An error occurred while processing option System Rename > Central System > SAP System Rename( Last error reported by the step: Error return code. DIAGNOSIS: Return code 14 of executable D:\oracle\TS1\11203/bin/oradim indicates an error. SOLUTION: For more information, see log file oradim.log.). You can now:

Choose Retry to repeat the current step.

Choose Log Files to get more information about the error.

Stop the option and continue later.

oradim.log shows below error message

Instance created.

DIM-00019: create service error

O/S-Error: (OS 2) The system cannot find the file specified.

sapinst.log shows below error

WARNING 2016-03-25 15:21:59.801 (<Domain>\ts1adm) id=modlib.jslib.childAppReturn

Execution of the command "D:\oracle\TS1\11203\bin\oradim -NEW -SID TS1 -STARTMODE manual -SRVCSTART system" finished with return code 14. Output:

Instance created.

DIM-00019: create service error

O/S-Error: (OS 2) The system cannot find the file specified.

ERROR 2016-03-25 15:21:59.801 (<Domain>\ts1adm) id=ind-rel.ind-os.ora.badReturnCode errno=CJS-00095

Error return code. DIAGNOSIS: Return code 14 of executable D:\oracle\TS1\11203/bin/oradim indicates an error. SOLUTION: For more information, see log file oradim.log.

ERROR 2016-03-25 15:21:59.801 (<Domain>\ts1adm) id=modlib.jslib.caughtException errno=MUT-03025

Caught ESAPinstJSError in module call: ind-rel.ind-os.ora.badReturnCode.

ERROR 2016-03-25 15:21:59.848 (<Domain>\ts1adm) id=controller.stepExecuted errno=FCO-00011

The step createInstance_oradim with step key |offlineadjustment_dialogs|ind|ind|ind|ind|0|0|offlineadjustment_db_post|ind|ind|ind|ind|db_post|0|ora_clone_db_post_dia|ind|ind|ind|ind|ora|0|ora_clone_obr|ind|ind|ind|ind|oraOBR|0|createInstance_oradim was executed with status ERROR ( Last error reported by the step: Error return code. DIAGNOSIS: Return code 14 of executable D:\oracle\TS1\11203/bin/oradim indicates an error. SOLUTION: For more information, see log file oradim.log.).

Request your expertise to resolve it at the earliest.

With Regards,

Parin Hariyani

Hi,

For OS/DB migration project, it is mandatory to get  "SAP OS DB migration check service".

Can someone please let me know the steps  to get "SAP OS DB migration check service".

I have already checked "SAP OS/DB Migration Check | SAP Support Portal"   but it does give us the steps.

Thanks you.

Best Regards,

Arpit.

Dear Experts,

I have small query on oracle restore using BR TOOLS.

we are facing the below issue while restoring the production backup on the quality system.

our production backup location is /oracle/PRD/sapbackup

Quality backup location is /oracle/QRD/SAPBACKUP.

these mounts are not attached to all servers.

we have taken the backup its created three files 1. one folder with all data files.  2 backupprd. log  3. zyx.fnd file

I have moved the above thee files and archive log to target backup folder and renamed the backup<PRD>.log to backup<QRD>.log

Now when i restore on quality system saying that backup files not found... actually its searching the backup on /oracle/PRD/sapbackup from fnd file.

is there any way to avoid it. Or do I need to change path anywhere in backup files

I have seen so many blogs nowhere exact resolution is not mentioned

Log :

BR0443W File '/oracle/PRD/sapbackup/besukhbi/sr3.data12.Z' to be restored not found

BR0443W File '/oracle/PRD/sapbackup/besukhbi/sr3.data13.Z' to be restored not found

BR0443W File '/oracle/PRD/sapbackup/besukhbi/sr3.data14.Z' to be restored not found

BR0443W File '/oracle/PRD/sapbackup/besukhbi/sr3.data15.Z' to be restored not found

BR0443W File '/oracle/PRD/sapbackup/besukhbi/sr3.data16.Z' to be restored not found

BR0443W File '/oracle/PRD/sapbackup/besukhbi/sr3.data17.Z' to be restored not found

But i have copied the files to /oracle/QRD/sapbackup/besukhbi with full permissions

Thanks,

Reddy

Has anyone used brrecover utility for system copy from one server another server. Our SAP installation is on Oracle 12c using ASM with Grid on Linux OS. The backup is configured with brtools using RMAN and the full backup executed successfully without any errors. I followed note 1003028 to prepare the restore on the target system and initiated the command 'brrecover -t reset -b last -f <NEW_SID> -u /'. As the intial step, brrecover identified the control file  correctly and restored from the tape into its temporary location '/oracle/<SID>/sapbackup/cntrl<OLD_SID>.dbf. However, it failed with an error when it tried to copy the control file from its temporary location to its permanent location in the ASM. It looks like copy command in asm cannot use the incarnation #s and they should be omitted. However, the copy command is executed by brrecover tool and I am not sure how do I interrupt to make the control file copy execute with correct syntax.

BR0280I BRRESTORE time stamp: 2016-03-31 17:24:37

BR0407I Restore of database: BX1

BR0408I BRRESTORE action ID: resvthbh

BR0409I BRRESTORE function ID: rsb

BR0449I Restore mode: partial

BR0411I Database files for restore:

+DATA/BX1/CONTROLFILE/current.261.907163733=+DATA/BX1/CONTROLFILE/current.261.907163733

+REDO/BX1/CONTROLFILE/current.256.907163733=+REDO/BX1/CONTROLFILE/current.256.907163733

BR0419I Files will be restored from backup: besvtffa.anr 2016-03-31

17:03:42

BR0416I 1 file found to restore, size 15.766 MB

BR0424I Files will not be decompressed

BR0421I Restore device type: rman_util

BR0351I Restoring +DATA/BX1/CONTROLFILE/current.261.907163733

BR0355I from /oracle/BX1/sapbackup/cntrlBX1.dbf ...

BR0278E Command output of 'ORACLE_SID=+ASM

ORACLE_HOME=/opt/oracle/product/grid/12102_1601

/oracle/BX1/121/bin/asmcmd --privilege sysdba cp

/oracle/BX1/sapbackup/cntrlBX1.dbf

+DATA/BX1/CONTROLFILE/current.261.907163733':

copying /oracle/BX1/sapbackup/cntrlBX1.dbf ->

+DATA/BX1/CONTROLFILE/current.261.907163733

ASMCMD-8016: copy source '/oracle/BX1/sapbackup/cntrlBX1.dbf' and

target

'+DATA/BX1/CONTROLFILE/current.261.907163733' failed

ORA-15056: additional error message

ORA-15046: ASM file name '+DATA/BX1/CONTROLFILE/current.261.907163733'

is not in single-file creation form

ORA-06512: at "SYS.X$DBMS_DISKGROUP", line 486

ORA-06512: at line 3 (DBD ERROR: OCIStmtExecute)

BR0280I BRRESTORE time stamp: 2016-03-31 17:18:11

Folks,

On our NW 7.4 ABAP system with Oracle 11G we face issues with the RMAN_PREP activity. (We did test this also with the latest version of BR*Tools!)

We use the feature on all of our systems, but only the NW 7.4 ABAP is not functioning properly.

Backups etc are running fine so hopefully you have some thought that can fix this issue...

Error:

C:\Windows\system32>brbackup -u / -c force -d rman_prep -p initBWO.sap -m ALL

BR0051I BRBACKUP 7.40 (16)

BR0055I Start of database backup: besvwfdo.rmp 2016-04-01 14:41:52

BR0484I BRBACKUP log file: F:\oracle\BWO\sapbackup\besvwfdo.rmp

BR0477I Oracle pfile D:\oracle\BWO\11204\database\initBWO.ora created from spfile D:\oracle\BWO\11204\database\sp

fileBWO.ora

BR0280I BRBACKUP time stamp: 2016-04-01 14:41:53

BR0057I Backup of database: BWO

BR0058I BRBACKUP action ID: besvwfdo

BR0059I BRBACKUP function ID: rmp

BR0110I Backup mode: ALL

BR0077I Database file for backup: D:\ORACLE\BWO\CNTRL\CNTRLBWO.DBF

BR0061I 56 files found for backup, total size 510236.570 MB

BR0143I Backup type: online

BR0130I Backup device type: rman_prep

BR0523I Preparation for using RMAN only - no backup

BR0140I Number of parallel copy processes: 2

BR0134I Unattended mode with 'force' active - no operator confirmation allowed

BR0525I Preparing backup of F:\ORACLE\BWO\SAPDATA2\BWO_43\BWO.DATA43 using RMAN...

BR0525I Preparing backup of F:\ORACLE\BWO\SAPDATA2\BWO_44\BWO.DATA44 using RMAN...

BR0278E Command output of 'D:\oracle\BWO\11204\BIN\rman nocatalog':

Recovery Manager: Release 11.2.0.4.0 - Production on Fri Apr 1 14:41:53 2016

Copyright (c) 1982, 2011, Oracle and/or its affiliates.  All rights reserved.

RMAN>

RMAN> connect target *

connected to target database: BWO (DBID=2668774452)

using target database control file instead of recovery catalog

RMAN> **end-of-file**

RMAN>

host command complete

RMAN> 2> 3> 4> 5> 6>

allocated channel: sbt

channel sbt: SID=43 device type=SBT_TAPE

channel sbt: MMS Version 7.20.36.6

executing command: SET NOCFAU

Starting backup at 2016-04-01 14:41:54

channel sbt: starting full datafile backup set

channel sbt: specifying datafile(s) in backup set

input datafile file number=00042 name=F:\ORACLE\BWO\SAPDATA2\BWO_43\BWO.DATA43

channel sbt: starting piece 1 at 2016-04-01 14:41:55

released channel: sbt

RMAN-00571: ===========================================================

RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============

RMAN-00571: ===========================================================

RMAN-03009: failure of backup command on sbt channel at 04/01/2016 14:41:56

ORA-19506: failed to create sequential file, name="besvwfdo.42", parms=""

ORA-27007: failed to open file

ORA-19511: Error received from media manager layer, error text:

   SBT error = 7008, errno = 0, sbtopen: i/o error

RMAN>

specification does not match any backup in the repository

RMAN>

Recovery Manager complete.

BR0278E Command output of 'BRSBTLIB':

#LOCK F:\oracle\BWO\sapbackup\.lock.brb

#CMD brtools -f rmanprep - 20971528192 0

BR0252E Function CreateProcess() failed for 'brtools -f rmanprep - 20971528192 0' at location BrPipeCreate-9

BR0253E errno 2: The system cannot find the file specified.

BR0272E Execution of program 'brtools -f rmanprep - 20971528192 0' through pipe failed

BR0280I BRSBTLIB time stamp: 2016-04-01 14.41.55

BR0538E Copying of data by BRSBTLIB failed

BR0280I BRSBTLIB time stamp: 2016-04-01 14.41.55

BR0537E BRSBTLIB call sbtopen() failed

BR0280I BRBACKUP time stamp: 2016-04-01 14:41:57

BR0279E Return code from 'D:\oracle\BWO\11204\BIN\rman nocatalog': 0

BR0536E RMAN call for database instance BWO failed

BR0200I BR_TRACE: location BrRmanCall-62, commands for RMAN in: F:\oracle\BWO\sapbackup\.besvwfdo.000

@F:\oracle\BWO\sapbackup\..besvwfdo..000

host 'brtools -f delete F:\oracle\BWO\sapbackup\..besvwfdo..000';

run { allocate channel sbt device type 'SBT_TAPE'

parms 'BLKSIZE=65536 ENV=(BR_ORACLE_SID=BWO,BR_ORACLE_HOME=D:\oracle\BWO\11204,BR_ORACLE_BASE=D:\oracle,SAPDATA_H

OME=F:\oracle\BWO,SAPEXE=E:\usr\sap\BWO\DVEBMGS00\exe)';

set nocfau;

backup as backupset full filesperset 9999 diskratio 0 tag besvwfdo format 'besvwfdo.42' check logical

datafile 'F:\ORACLE\BWO\SAPDATA2\BWO_43\BWO.DATA43';

release channel sbt; }

list backup of datafile 42 tag besvwfdo;

exit;

Thanks in advance!

Hi All,

I'm preparing for an upgrade of Oracle from 10.2.0.5 to 12.1.0.2 and have run into a little issue.

I've run the following command line

./RUNINSTALLER -oracle_base /oracle/SID -tmp /oracle/SID/temp -check

After encountering this error about /tmp free space

Free Space - This is a prerequisite condition to test whether the minimum required free space is available on the file system.

 

This is a prerequisite condition to test whether sufficient free space is available in the file system. (more details)

Expected Value

: 5GB

Actual Value

: 644.4023MB

But that didn't work, so I set environment variables $TMP and $TMPDIR as per the documentation from Oracle https://docs.oracle.com/database/121/AXDQI/toc.htm#BABIHAJA and yet it still complains.

Is this a bug or am I doing something wrong here?

Thanks

Craig

HI Folks,

Could anyone please suggest  how to proceed  further if the full stats command brconnect -c -u / -f stats -t all –f collect -p 4 has not updated the tables in ECC system.

Regards,

Sharma TVK

Hi All,

Afraid it's me again with yet another question.

I have just ran the pre-upgrade checks as per the Upgrade Guide for UNIX and am looking at the resultant log and output.

It's complaining about the processes parameter being too low.

                          [Pre-Upgrade Checks]

**********************************************************************

WARNING: --> Process Count may be too low

 

     Database has a maximum process count of 192 which is lower than the

     default value of 300 for this release.

     You should update your processes value prior to the upgrade

     to a value of at least 300.

     For example:

        ALTER SYSTEM SET PROCESSES=300 SCOPE=SPFILE

     or update your init.ora file.

I have checked this parameter against both the 10g note and the 12c note and both say the same thing to calculate as follows :-

So I double checked this and I get the following ABAP only,

16 WPs * 2  = 32

PARALLEL_MAX_SERVERS (CPU Core Count (12) * 10) = 120

+ 40

So I get 192 which is exactly what is set.

So why is it complaining about it needing to be at least 300?

Also things like events and _fix_control amongst others below should these be removed just prior to the upgrade or can these remain and be checked/removed post upgrade?

_disable_objstat_del_broadcast = FALSE

_external_scn_rejection_threshold_hours = 24

_first_spare_parameter = 1

_fix_control = 13627489:ON, 5099019:ON, 5705630:ON, 5765456:3, 6055658:OFF, 6399597:ON, 6430500:ON, 6440977:ON, 6626018:ON, 6670551:ON, 6972291:ON, 7692248:ON, 7891471:ON, 9196440:ON, 9495669:ON

_optim_peek_user_binds = FALSE

_optimizer_mjc_enabled = FALSE

_sort_elimination_cost_ratio = 10

Thanks

Craig

Dear all,

Good day..!

Recently,The oracle DB version was upgraded from 11.2.0.3 to 11.2.0.4.

Since then the backup started to take more than 24 hours – 48 hours duration and sometimes it hangs. DB Statistics and DB Checks were manually triggered at OS Level daily and even these takes long time.

Usually Backup used to complete within 4-5 hrs before upgrade.

It is impacting day to day transactions and BI chain process badly as Back up is not completing on time.

Kindly guide us to resolve the problem. Thank you.

Best Regards,

Gopukrish

Hello,

how to identify inactive steps in an execution plan in ST04 for Oracle 12c.

i am referring to Stefen's blog post.

http://scn.sap.com/community/oracle/blog/2013/09/24/oracle-db-optimizer-part-vii--looking-under-the-hood-of-adaptive-query-optimization-adaptive-plans-oracle-12c

attached is a screenshot from one of the system, i am working on.

which of the steps are inactive.

Hello

I noticed while upgrading oracle 11.2 to oracle 12c,we are no more provided an option to disable partitioning while upgrading to Oracle 12c using DBUA

1. Is that correct ? Or there is a way to disable the partitioning  while upgrading oracle to 12c using DBUA ?

2. Also as per one of the notes,it says partitioning is necessary for BI systems, so do we need to have partitioning while upgrading oracle to 12c on

ECC6 EHP7

CRM7 EHP3

SOLUTION MANAGER 7.1 SPS14

Thanks

Shradha

Hi All

Me yet again.

I have just installed BR*Tools 7.40 as per my previous posting and correcting an issue with it not running for ora<SID> user.

Unbeknown until this morning that as a result of correcting that issue, sqlplus now doesn't work for either <SID>adm or ora<SID> users.

Error is :-

sqlplus -version

SP2-1503: Unable to initialize Oracle call interface

SP2-0152: ORACLE may not be functioning properly

Now for the life of me I couldn't figure this out.  For <SID>adm user no environment settings were changed when I patched Oracle from 10.2.0.4 to 10.2.0.5 for prep to 12c and so I was confused as to why it stopped working.  The only thing I changed for ora<SID> user was to add /oracle/client/11x_64/instantclient to the LIBPATH environment variable to get it to work.  Otherwise you get the error I posted before as below.

brspace -p init<SID>.sap -s 20 -l E -u / -f dbshow -c dbstate

exec(): 0509-036 Cannot load program brspace because of the following errors:

rtld: 0712-001 Symbol modf was referenced

      from module brspace(), but a runtime definition

      of the symbol was not found.

rtld: 0712-001 Symbol strcat was referenced

      from module brspace(), but a runtime definition

      of the symbol was not found.

rtld: 0712-001 Symbol strcpy was referenced

      from module brspace(), but a runtime definition

      of the symbol was not found.

rtld: 0712-001 Symbol strcmp was referenced

      from module brspace(), but a runtime definition

      of the symbol was not found.

rtld: 0712-001 Symbol strncat was referenced

      from module brspace(), but a runtime definition

      of the symbol was not found.

rtld: 0712-001 Symbol strncpy was referenced

      from module brspace(), but a runtime definition

      of the symbol was not found.

rtld: 0712-001 Symbol fsav was referenced

      from module brspace(), but a runtime definition

      of the symbol was not found.

rtld: 0712-001 Symbol fres was referenced

      from module brspace(), but a runtime definition

      of the symbol was not found.

rtld: 0712-001 Symbol floor was referenced

      from module brspace(), but a runtime definition

      of the symbol was not found.

rtld: 0712-001 Symbol ceil was referenced

      from module brspace(), but a runtime definition

      of the symbol was not found.

rtld: 0712-002 fatal error: exiting.

So this is a change to the way BR*Tools used to work it seems.

Now for the problem encountered.

With /oracle/client/11x_64/instantclient added to LIBPATH at the end you still get the above error.  Moving it before /oracle/<SID>/102_64/lib fixes it for user ora<SID>

However the side affect to this is that sqlplus now no longer functions and you get the error at the start of this thread!

Now what's strange is that if you unsetenv LIBPATH and replace it with LD_LIBRARY_PATH both programs work.  I know that with AIX 5.3 onwards they use LD_LIBRARY_PATH by default but will also use LIBPATH if set IBM Managing LIBPATH and LD_LIBRARY_PATH environment variables for LSF jobs on AIX5.3 - United States

However that's not how the .dbenv scripts are written, they explicitly set LIBPATH if it detects AIX.

Also strange is that I can't run sqlplus any more as the user <SID>adm without again changing LIBPATH and adding in /oracle/<SID>/102_64/lib which again isn't part of the logon scripts.

So do I replace LIBPATH in those logon scripts with LD_LIBRARY_PATH or what?  What's the consequence of doing that?

Thanks

Craig

Hi All,

Me again.

I am now looking at how to upgrade our production environment which uses Oracle Data Guard.

I've read Upgrading Databases in a Data Guard Configuration which applies to 11g but presumably this is also true for 12c?

How do you perform the install on the physical standby? 

From the document it says shutdown both primary and standby install Oracle on standby then mount the standby database. 

From SAP perspective presumably before mounting apply SBP's.

Mount from the new Oracle home?

Then install and upgrade the primary database and the upgrade will transfer to the standby via the redo logs.

Is it really that simply?

Thanks

Craig

dear Gurus ,

i am getting an error when try start ./sapinst 70SWPM10SP10 ,( I am trying to do system copy NW7.0 dual stack , db export done

when try to start CI export ,)

error text -

[root@xxxxxx 70swpm]# ./sapinst

[========================] \ extracting... done!

#################################################################

Unable to get handle to: iamodel11722.so

#################################################################

uname -a

Linux ENCARTA 2.6.9-42.ELsmp #1  SMP Wed Jul 12 23:32:02 EDT 2006 x86_64 x86_64 x86_64 GNU/Linux

SWPM -

70SWPM10SP10_4-20009701.sar

please help me get this sorted

thank you

charith

Hi All,

I have an ERP 6.0 EHP2 system that we'd like to copy onto new hardware for testing.

I understand we can use System Copy function of SWPM but I don't see an option in the latest release that has EHP2 only EHP4 seems to be the oldest release.

So in order to copy this system I am assuming I have to choose ERP 6.0 SR3 and then install EHP2 on top in the target before I can do the system copy.  Or is there an easier way without first having to update to EHP4?

Also I've just realised what about the export option?  There is also no export option for an EHP2 ERP 6 system.  How would that work?

Thanks

Craig

When upgrading from e.g. Oracle 10g to 11c I often used Oracle Flashback technology for a fast fallback to the old Oracle release in case tests were negative and the upgrade had to be reverted. Now I thought that upgrading from Oracle 11c to 12c could be also safeguarded by setting an Oracle guaranteed restore point (GRP). Looks like this is no longer possible. Applying the SAP Bundle Patch requires raising the COMPATIBLE parameter, which breaks the GRP:

$ env ORACLE_HOME=$OHRDBMS /oracle/SID/121/sapbundle/SBP_12102160119_201602/catsbp

catsbp - Post-process Installation of SBP 12.1.0.2.160119 201602.

Copyright (c) 2015, 2016, Oracle and/or its affiliates. All rights reserved.

Log file: $ORACLE_BASE/cfgtoollogs/sqlpatch/SAP201602_APPLY_SID_2016_04_06-10-14-19.log

Connecting to database...

Connecting to database...done.

Executing Datapatch...

Executing Datapatch...failed.

Reason: Failure during prerequisite checks

Loading style sheets...

Loading style sheets...skipped.

Reason: Style sheets already loaded

Recompiling objects with utlrp...

Recompiling objects with utlrp...skipped.

Reason: Objects already compiled

Post-installation of this SAP Bundle Patch is incomplete:

Cause: Datapatch has encountered an error during its prerequisite checks.

        No post-installation steps have been executed.

Action: Refer to the log file for more information and resolve the error

        cause.

Database error:

ORA-00406: COMPATIBLE parameter needs to be 12.0.0.0.0 or greater ORA-00722: Feature "Editions" [for Statement " create or replace noneditionable view dba_registry_history ( action_time, acion, namespace, version, id, bundle_series, comments ) as select action_time, action, namespace, version, id, bundle_series, comments from registry$history "] at catsbp line 1813

catsbp completed with errors, post-installation of this SAP Bundle

Patch is INCOMPLETE. Refer to the log file

$ORACLE_BASE/cfgtoollogs/sqlpatch/SAP201602_APPLY_SID_2016_04_06-10-14-19.log

for more information.

Overall Status: INCOMPLETE

Is there any trick by which I can avoid changing the COMPATIBLE parameter? Or is it only possible have a GRP during the Oracle 12c upgrade if I skip the SAP Bundle Patch?

Regards,

Mark

Hi All,

We are getting error while performing Oracle DB reorg as below,

_______________________________________________________________

BR0301E SQL error -42012 in thread 5 at location tab_onl_reorg-63, SQL statement:

'BEGIN DBMS_REDEFINITION.FINISH_REDEF_TABLE (UNAME => '"SAPBWP"', ORIG_TABLE => '"/BI0/E0IC_C03"', INT_TABLE => '"/BI0/E0IC_C03#$"'); END;'

ORA-42012: error occurred while completing the redefinition

ORA-12008: error in materialized view refresh path

ORA-04098: trigger 'SAPBWP./BI0/0500000005#$' is invalid and failed re-validation

ORA-06512: at "SYS.DBMS_REDEFINITION", line 82

ORA-06512: at "SYS.DBMS_REDEFINITION", line 1522

ORA-06512: at line 1

___________________________________________________________________________

I have check sap note 982120 but there is not report SAP_DROP_OLD_DBTRIGGER_ORA available on our BW system. Our BW is 7.31  SP 15.

Please suggest how to resolve this, if any one face such issue.

Regards,

Jithin M